Isotemp marine water heaters are specifically designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. These marine water heaters are very robust and efficiently insulated to keep warm water available at all times, whatever the conditions.

The Isotemp Basic series of stainless steel marine water heaters comes with brushed stainless steel cover as well as innovative internal design.

They achieve the highest possible capacity through optimised installation of the engine water heat exchanger, as well as the immersion heater. The Isotemp Basic series of marine hot water tanks have a larger diameter (395mm) and shorter length.

The Isotemp Basic 40 (Double Coil) water heater is one of only three Basic models (24 and 75 also) that have the double engine heat exchanger option.

A key feature is the thermostatic mixing valve that mixes a small amount of the hot water from the tank with cold water from your fresh-water system. This conserves the heated water and is important for cruisers who want to minimize power consumption.

The polyurethane insulation minimizes heat loss and the water in the tank will stay hot for up to 24 hours. (Results will vary with the amount of hot water drawn from the tank.)

Isotemp Basic water heaters come with a safety relief valve.

We recommend fitting the largest tank in the available space. Be sure when measuring to leave a few inches at the end for fittings.

Advantages of the Isotemp Basic 40 (Double Coil) Water Heater

• Extra long, corrugated coils for high heat exchange efficiency
• Special 7.0 bar / 100 psi safety valve
• Simple winter drain
• Ultra-thick insulation for lowest temperature loss
• Electrical plug and play immersion heating element, especially designed to heat also the water at the bottom of the tank
• Thermostat mixing valve available as an option
• Immersion heating element available in 750, 1200, 2000 W as an option
• The 2000 W heating element is only compatible on 230 V versions
• Robust design
• Water tank in stainless steel
• External cylinder in stainless steel
• Stable fixing feet in stainless steel
• 360 ° adjustable mounting for easy
• installation also on bulkhead

The post Isotemp Basic 40 Hot Water Tank (Double Coil) appeared first on JPC Direct.

Isotemp marine water heaters are specifically designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. These marine water heaters are very robust and efficiently insulated to keep warm water available at all times, whatever the conditions.

The Isotemp Basic series of stainless steel marine water heaters comes with brushed stainless steel cover as well as innovative internal design.

They achieve the highest possible capacity through optimised installation of the engine water heat exchanger, as well as the immersion heater. The Isotemp Basic series of marine hot water tanks have a larger diameter (16 inches) and shorter length.

The Isotemp Basic 75 (Double Coil) water heater is one of only three Basic models (24 and 40 also) that have the double engine heat exchanger option.

A key feature is the thermostatic mixing valve that mixes a small amount of the hot water from the tank with cold water from your fresh-water system. This conserves the heated water and is important for cruisers who want to minimize power consumption.

The polyurethane insulation minimizes heat loss and the water in the tank will stay hot for up to 24 hours. (Results will vary with the amount of hot water drawn from the tank.)

Isotemp Basic water heaters come with a safety relief valve.

We recommend fitting the largest tank in the available space. Be sure when measuring to leave a few inches at the end for fittings.

Advantages of the Isotemp Basic 75 (Double Coil) Water Heater

• Extra long, corrugated coils for high heat exchange efficiency
• Special 7.0 bar / 100 psi safety valve
• Simple winter drain
• Ultra-thick insulation for lowest temperature loss
• Electrical plug and play immersion heating element, especially designed to heat also the water at the bottom of the tank
• Thermostat mixing valve available as an option
• Immersion heating element available in 750, 1200, 2000 W as an option
• The 2000 W heating element is only compatible on 230 V versions
• Robust design
• Water tank in stainless steel
• External cylinder in stainless steel
• Stable fixing feet in stainless steel
• 360 ° adjustable mounting for easy
• installation also on bulkhead

The post Isotemp Basic 75 Hot Water Tank (Double Coil) appeared first on JPC Direct.

Isotemp marine water heaters are specifically designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. These marine water heaters are very robust and efficiently insulated to keep warm water available at all times, whatever the conditions.

The Isotemp Basic series of stainless steel marine water heaters comes with brushed stainless steel cover as well as innovative internal design.

They achieve the highest possible capacity through optimised installation of the engine water heat exchanger, as well as the immersion heater. The Isotemp Basic series of marine hot water tanks have a larger diameter (16 inches) and shorter length.

The Isotemp Basic 24 (Double Coil) water heater is one of only three Basic models (40 and 75 also) that have the double engine heat exchanger option.

A key feature is the thermostatic mixing valve that mixes a small amount of the hot water from the tank with cold water from your fresh-water system. This conserves the heated water and is important for cruisers who want to minimize power consumption.

The polyurethane insulation minimizes heat loss and the water in the tank will stay hot for up to 24 hours. (Results will vary with the amount of hot water drawn from the tank.)

Isotemp Basic water heaters come with a safety relief valve.

We recommend fitting the largest tank in the available space. Be sure when measuring to leave a few inches at the end for fittings.

Advantages of the Isotemp Basic 24 (Double Coil) Water Heater

• Extra long, corrugated coils for high heat exchange efficiency
• Special 7.0 bar / 100 psi safety valve
• Simple winter drain
• Ultra-thick insulation for lowest temperature loss
• Electrical plug and play immersion heating element, especially designed to heat also the water at the bottom of the tank
• Thermostat mixing valve available as an option
• Immersion heating element available in 750, 1200, 2000 W as an option
• The 2000 W heating element is only compatible on 230 V versions
• Robust design
• Water tank in stainless steel
• External cylinder in stainless steel
• Stable fixing feet in stainless steel
• 360 ° adjustable mounting for easy
• installation also on bulkhead

The post Isotemp Basic 24 Hot Water Tank (Double Coil) appeared first on JPC Direct.

Specifically designed for use in the demanding marine environment.

Brushed stainless steel cover and a 316-grade stainless steel inner tank.

Designed to maximise efficiency with the positioning of the heating element in the tank.

Supplied with the Isotemp Temperature Control Safety Mixing Valve.

This protects users from scalding hot water.

Mixing valve mixes the boat’s water with the hot water to deliver the right water temperature.

This extends the volume of hot water you get from a smaller tank.

Advantages of the Isotemp Slim Square 16 Water Heater

• Extra-long, corrugated coils for high heat exchange efficiency
• Special 5.0 bar / 70 psi safety valve
• Simple winter drain
• Ultra-thick insulation for lowest temperature loss
• Electrical plug and play immersion heating element, especially designed to heat water at the bottom of the tank
• Thermostat mixing valve available as an option
• Immersion heating element available in 750 W
• Robust design
• Water tank in stainless steel
• Stable fixing feet in stainless steel
• 360 ° adjustable mounting for easy installation

The post Isotemp Slim Square 16 Hot Water Tank appeared first on JPC Direct.

A compact, robust marine water heater.

Sturdy polypropylene casing.

Available in 5 sizes ranging from 15 to 40 litres.

Advantages of the Isotemp Spa 40 Water Heater

• Stainless Steel AISI 316 inner tank
• 6 bar safety valve
• Extra thick insulation for high performance
• Outer casing made of high quality polypropylene
• 1/2” NPT water connections
• Standard 750 watt immersion heating element heats water quickly but will not overload generators or dock breakers

The post Isotemp Spa 40 Hot Water Tank appeared first on JPC Direct.

A compact, robust marine water heater.

Sturdy polypropylene casing.

Available in 5 sizes ranging from 15 to 40 litres.

Advantages of the Isotemp Spa 30 Water Heater

• Stainless Steel AISI 316 inner tank
• 6 bar safety valve
• Extra thick insulation for high performance
• Outer casing made of high quality polypropylene
• 1/2” NPT water connections
• Standard 750 watt immersion heating element heats water quickly but will not overload generators or dock breakers

The post Isotemp Spa 30 Hot Water Tank appeared first on JPC Direct.

A compact, robust marine water heater.

Sturdy polypropylene casing.

Available in 5 sizes ranging from 15 to 40 litres.

Advantages of the Isotemp Spa 15 Water Heater

• Stainless Steel AISI 316 inner tank
• 6 bar safety valve
• Extra thick insulation for high performance
• Outer casing made of high quality polypropylene
• 1/2” NPT water connections
• Standard 750 watt immersion heating element heats water quickly but will not overload generators or dock breake

The post Isotemp Spa 15 Hot Water Tank appeared first on JPC Direct.

The Isotemp Slim series of marine water heaters have a smaller diameter (12 inches) and longer length, than the Basic series, but are otherwise identical. They also have a brushed stainless steel cover, and the same  innovative internal design.

They achieve the highest possible capacity through optimised installation of the engine water heat exchanger, as well as the immersion heater.

The new Slim series of calorifiers are just 12″ in diameter, are perfect for all sizes of yacht, as they can be mounted in lockers, or under bunks and are supplied as complete kits ready to install. The design allows both horizontal and vertical mounting.

Isotemp marine water heaters are specifically designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. These marine water heaters are very robust and efficiently insulated to keep warm water available at all times, whatever the conditions.

A key feature is the thermostatic mixing valve that mixes a small amount of the hot water from the tank with cold water from your fresh-water system. This conserves the heated water and is important for cruisers who want to minimize power consumption.

The polyurethane insulation minimizes heat loss and the water in the tank will stay hot for up to 24 hours. (Results will vary with the amount of hot water drawn from the tank.)

Isotemp Slim water heaters come with a safety relief valve.

We recommend fitting the largest tank in the available space. Be sure when measuring to leave a few inches at the end for fittings.

Advantages of the Isotemp Slim 25 Water Heater

• Extra long, corrugated coils for high heat exchange efficiency
• Special 7.0 bar / 100 psi safety valve
• Simple winter drain
• Ultra-thick insulation for lowest temperature loss
• Electrical plug and play immersion heating element, especially designed to heat also the water at the bottom of the tank
• Thermostat mixing valve available as an option
• Immersion heating element available in 750, 1200, 2000 W as an option
• The 2000 W heating element is only compatible on 230 V versions
• Robust design
• Water tank in stainless steel
• External cylinder in stainless steel
• Stable fixing feet in stainless steel
• 360 ° adjustable mounting for easy
• installation also on bulkhead

The post Isotemp Slim 25 Hot Water Tank appeared first on JPC Direct.