No products in the cart.
The Isotemp Basic 40 (Double Coil) Water Heater is a durable and efficient marine water heater.
Isotemp marine water heaters are specifically designed for the use on yachts and boats. Only high quality components are chosen to ensure the best product performance. These marine water heaters are very robust and efficiently insulated to keep warm water available at all times, whatever the conditions.
The Isotemp Basic series of stainless steel marine water heaters comes with brushed stainless steel cover as well as innovative internal design.
They achieve the highest possible capacity through optimised installation of the engine water heat exchanger, as well as the immersion heater. The Isotemp Basic series of marine hot water tanks have a larger diameter (395mm) and shorter length.
The Isotemp Basic 40 (Double Coil) water heater is one of only three Basic models (24 and 75 also) that have the double engine heat exchanger option.
A key feature is the thermostatic mixing valve that mixes a small amount of the hot water from the tank with cold water from your fresh-water system. This conserves the heated water and is important for cruisers who want to minimize power consumption.
The polyurethane insulation minimizes heat loss and the water in the tank will stay hot for up to 24 hours. (Results will vary with the amount of hot water drawn from the tank.)
Isotemp Basic water heaters come with a safety relief valve.
We recommend fitting the largest tank in the available space. Be sure when measuring to leave a few inches at the end for fittings.
Advantages of the Isotemp Basic 40 (Double Coil) Water Heater
- Extra long, corrugated coils for high heat exchange efficiency
- Special 7.0 bar / 100 psi safety valve
- Simple winter drain
- Ultra-thick insulation for lowest temperature loss
- Electrical plug and play immersion heating element, especially designed to heat also the water at the bottom of the tank
- Thermostat mixing valve available as an option
- Immersion heating element available in 750, 1200, 2000 W as an option
- The 2000 W heating element is only compatible on 230 V versions
- Robust design
- Water tank in stainless steel
- External cylinder in stainless steel
- Stable fixing feet in stainless steel
- 360 ° adjustable mounting for easy
- installation also on bulkhead
Reviews
There are no reviews yet.